docs: changelog entries for the parity round and corpus number

Assisted-by: GLM 5.3

CHANGELOG.md

@@ -25,8 +25,8 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - **`gasm audit-instructions --corpus [dir]`.**  Assembles every `.s`
   file under a directory (default GOROOT/src) with the gasm encoder
   only: suffixed files for their architecture, suffix-less files for
-  all four, as a GOARCH build would.  Reports the headline number (108
+  all four, as a GOARCH build would.  Reports the headline number (127
-  of 627 GOROOT files, 17.2 %, assemble for every target architecture,
+  of 627 GOROOT files, 20.3 %, assemble for every target architecture,
   against 23 in the previous release), the per-architecture pass rates
   and the most common failure reasons with a representative file each,
   which drive the encodability backlog by frequency.
@@ -263,6 +263,35 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
   exit-2 contract now holds, `asm -o` no longer prints the hex dump it
   claimed to replace, and `verify --ground-truth` works for amd64
   kernels on non-amd64 hosts instead of refusing with JIT advice.
+- **arm64 store-exclusive instructions read their operands in the
+  toolchain's order.**  `STXR` treated the first register as the status
+  register where `go tool asm` reads it as the data register, so the
+  same source assembled to different code in the two assemblers; the
+  pair forms (`STXP`, `LDXP` and their acquire/release variants) are
+  accepted now, in the toolchain spelling.
+- **Large arm64 frames matched the toolchain's sequences.**  A frame
+  beyond the immediate range that is not a movcon constant (roughly
+  64 KiB and up) made `gasm verify` report a false mismatch: the
+  toolchain splits the prologue subtraction into two 12-bit immediates
+  and materialises the non-leaf epilogue addition through the temporary
+  register; gasm emits the same sequences and the spadj boundaries
+  follow the real word counts.
+- **The width spellings GOROOT uses assemble.**  `MOVLQZX` (four uses in
+  `runtime/asm_amd64.s`), `MOVBQSX`, `MOVWQSX`, `MOVBLSX`, `MOVBWSX`,
+  `MOVBWZX` and `PMOVMSKB` (the bytealg kernels) encode byte-identically
+  with `go tool asm`, and the linter reports them encodable; a
+  `MOVLQZX` is the plain 32-bit move, exactly as the toolchain lowers
+  it.
+- **`verify --ground-truth` no longer reports a mismatch for functions
+  whose size is not a multiple of 16.**  The toolchain pads text symbols
+  to 16-byte boundaries; the comparison now checks the padding is zero
+  instead of comparing it, the same rule the test suite applies.
+- **riscv64 accepts the `g` spelling of the goroutine register**, like
+  the other architectures, and the abi kernels use it; every verify
+  kernel is now ground-truth checkable (the numeric `X27` spelling the
+  kernels used is one `go tool asm` rejects).
+- The GOROOT corpus number rose to 127 of 627 files (20.3 %) assembling
+  for every target architecture, from 108.
 
 ## [0.33.0] - 2026-09-14
 
@@ -481,7 +510,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [0.31.0] - 2026-08-20
 
-The arm64 encoder (Phase 5; complete) ships with ELF64 and GOOBJ emission,
+The arm64 encoder ships with ELF64 and GOOBJ emission,
 verified byte-for-byte against `GOARCH=arm64 go tool asm` and linked into a
 real `go build`.  The encoder covers the full integer instruction set, FP
 arithmetic, conditional select, CRC32, and the MOV pseudo-instruction with
@@ -489,7 +518,7 @@ bitmask immediate encoding.  The project now requires Go 1.27.
 
 ### Added
 
-- **arm64 encoder (Phase 5; complete).**  `gasm asm` can now assemble `_arm64.s`
+- **arm64 encoder.**  `gasm asm` can now assemble `_arm64.s`
   files: the AArch64 integer instruction set with the MOV pseudo-instruction and
   its immediate-constant expansions (MOVZ/MOVN/MOVK for wide immediates, ORR with
   logical bitmask encoding for values like `$1`), data-processing (shifted
@@ -497,8 +526,9 @@ bitmask immediate encoding.  The project now requires Go 1.27.
   immediate), conditional and unconditional branches, FP/SP frame mapping,
   SB/global symbol references (ADRP+ADD pairs with `R_ADDRARM64` relocations),
   jump chain folding, and ELF64 emission (`gasm asm --format elf`).  Ground-truth
-  verification against `GOARCH=arm64 go tool asm` matches byte-for-byte.  Phase 5
+  verification against `GOARCH=arm64 go tool asm` matches byte-for-byte.  The
-  (the other architectures; RISC-V, LoongArch, arm64) is now complete.
+  encoder set for the remaining architectures (RISC-V, LoongArch, arm64) is
+  complete.
 
 ### Changed
 
@@ -508,7 +538,7 @@ bitmask immediate encoding.  The project now requires Go 1.27.
 
 ## [0.30.0] - 2026-08-13
 
-The LoongArch encoder (Phase 5) ships with ELF64 and GOOBJ emission, verified
+The LoongArch encoder ships with ELF64 and GOOBJ emission, verified
 byte-for-byte against `GOARCH=loong64 go tool asm` and linked into a real
 `go build`; the shared GOOBJ emitter now writes the per-function DWARF symbols
 the linker's DWARF pass reads.  The RISC-V encoder reaches byte-for-byte parity
@@ -519,7 +549,7 @@ tracks four hardware watchpoint slots, and the toolkit is Linux-only.
 
 ### Added
 
-- **LoongArch encoder (Phase 5).**  `gasm asm` can now assemble `_loong64.s`
+- **LoongArch encoder.**  `gasm asm` can now assemble `_loong64.s`
   files: the full LoongArch64 instruction set with the dual-form arithmetic
   mnemonics, the 16/21-bit branch families, the MOV pseudo-instruction and
   its immediate-constant expansions, FP/SP frame mapping, SB/global symbol
@@ -608,7 +638,7 @@ tracks four hardware watchpoint slots, and the toolkit is Linux-only.
 
 - **Linux only.**  The toolkit, its CI and the released binaries are now
   Linux-only; cross-compiled to linux/{amd64,arm64,riscv64,loong64}.
-- **Phase 4 closed.**  README's "Remaining" list for the debugger is gone;
+- **Debugger complete.**  README's "Remaining" list for the debugger is gone;
   disassembly at PC, memory-write, watchpoints, and source-line mapping are
   all shipped.
 
@@ -818,7 +848,7 @@ exposes the full dynamic-analysis toolkit.
 
 ## [0.20.0] - 2026-07-25
 
-Coverage profiling: the third pillar of Phase 3.  Static basic-block
+Coverage profiling.  Static basic-block
 enumeration from the assembler's label map, combined with multi-input path
 diversity measurement; how many observationally distinct execution paths a
 test corpus exercises.
@@ -843,7 +873,7 @@ execute) without fighting the runtime.
 
 ## [0.19.0] - 2026-07-24
 
-Runtime ABI checks: the second pillar of Phase 3.  The JIT trampoline now
+Runtime ABI checks.  The JIT trampoline now
 has an ABI-checking variant that sets sentinels in the callee-saved registers
 (BP, R14) before entering the assembled function and verifies they survive on
 return, plus a red-zone canary (128 bytes below SP filled with 0xA5) that
@@ -878,7 +908,7 @@ codes.  This is the automated form of the project's bit-identical contract.
 
 ## [0.17.0] - 2026-07-22
 
-Phase 3 begins: dynamic analysis.  A JIT execution substrate that assembles
+Dynamic analysis.  A JIT execution substrate that assembles
 Plan 9 amd64 kernels into executable memory and calls them directly; pure Go
 (stdlib only, `syscall.Mmap` + an assembly trampoline), no cgo, no external
 toolchain.
@@ -1285,8 +1315,8 @@ support).
 
 ## [0.2.0] - 2026-07-07
 
-The Phase 2 assembler grows the SIMD set: shuffles, extract/insert, permute
+The assembler grows the SIMD set: shuffles, extract/insert, permute
-and the moves, on top of the Phase 1 VEX forms.
+and the moves, on top of the VEX forms of the first release.
 
 ### Added
 
@@ -1322,7 +1352,7 @@ and the moves, on top of the Phase 1 VEX forms.
 
 ## [0.1.0] - 2026-07-06
 
-Initial release; the Phase 1 foundation.
+Initial release: the foundation.
 
 ### Added
 

README.md

@@ -119,7 +119,7 @@ can emit today is narrower, and a recognised but unencodable instruction is
 reported as an explicit error, never as a wrong byte.
 
 The same measurement runs over GOROOT's whole assembly corpus:
-`gasm audit-instructions --corpus` reports 108 of 627 files (17.2 %)
+`gasm audit-instructions --corpus` reports 127 of 627 files (20.3 %)
 assembling for every target architecture today, with the top failure
 reasons per architecture; the number moves with every release.